Microchip Technology UCS81003, Руководство пользователя

Страница: 23 / 52

UCS81003 EVALUATION
BOARD USER’S GUIDE

2014 Microchip Technology Inc. DS50002300A-page 23
Chapter 4. Software Description
4.1 OVERVIEW
To get the graphical interface and the evaluation board running, follow these
instructions:
1. Start the UCS81003 GUI software: from the Windows Start menu, select
Programs > Microchip > UCS81003
.
2. Connect the USB mini connector end of the cable to the board and the standard
USB connector of the cable to any available USB port on the PC. If the V
DD
supply is connected to VS (the jumper on J4 header is populated on position 2-3),
then connect the VS supply. The USB Activity LED should light, indicating that
the MCP2221 USB bridge is connected to the PC.
The UCS81003 Evaluation Board interface ( Figure 4-1 ), consists of five tabs (
Main
,
Configuration & General Status
,
Custom Charging
,
Register Set
and
Demo
) as
well as the right side sections that are always visible (
Panel Controls
,
Pin State &
Attach Status
and
Active Mode Selection
).
FIGURE 4-1: UCS81003 Evaluation Board Initial Window.
Tabs
Fixed Panel
with Controls