Microchip Technology SAMA5D3 XPLAINED, Руководство пользователя

Страница: 32 / 48

SAMA5D3 Ethernet Development System User’s Guide
DS50002789A-page 32

2018 Microchip Technology Inc.
If the error in Figure A-5 appears, rerun the
flash_board.bat
command.
FIGURE A-5: FLASH_BOARD.BAT COMMAND ERROR
A.3 SD CARD IMAGE PROGRAMMING
The
SAMA5D3_ESD_Images_Vxx.xx.xx.zip
file contains an SD card image that must be flashed to the
SD card. The image is available in the
SAMA5D3_ESD_Images/images
folder.
To flash images to the SD card, the Etcher tool is recommended. The tool can be downloaded from
https://etcher.io. The Etcher tool provides the same GUI interface both for Windows and Linux.
For Windows, download and install the 32-bit installer package. This procedure is tested on Win7x64.
For Linux, download the x86 or x64 package depending on your Linux system. This procedure is tested on
Ubuntu x64 14.04.05 LTS distribution.
A.3.1 SD Card Programming
Note: An SD card size of 16 GB or greater is required.
1. Unzip the zip file to a folder (for example,
C:\tmp
).
2. The SD card image (
sdcard.img
) is located in the
SAMA5D3_ESD_Images\images
folder.
(
c:\tmp\ SAMA5D3_ESD_Images\images\sdcard.img)
folder
3. Start the Etcher tool and select the image (
sdcard.img
). Make sure the appropriate SD card is
selected because all the contents of the SD card will be erased.
4. Select Flash! to program the SD card. See Figure A-6 .