2.
Kit Overview
The PIC32 WFI32E Curiosity Board contains a WFI32E01 module mounted on the carrier board. All the signals from
the module are brought onto the Curiosity board, where they are connected to on-board peripherals or are terminated
onto headers for rapid prototyping or evaluation.
Figure 2-1. PIC32 WFI32E Curiosity Board (EV12F11A)
User Configurable Switch (SW200)
Power Source Selection
Jumper (J202)
mikroBUS Socket (J200)
Reset Switch (SW201)
GPIO Header (J207)
Ethernet PHY Header (J208)
WFI32E01 Module
Temperature Sensor (J209)
XPRO Header (J203)
Target USB (J204)
Debug USB (J302)
ICSP Header (J206)
WFI32E01 Carrier Board
VBUS-VIN
PKOB-VIN
P/S-VIN
3V3_MOD and 3V3_IN (J102)
™
External Power Supply (J201)
SST26VF032B SPI Flash
Debugger/Programmer Header (J301)
Carrier Board Connector (J401)
USB Host/Device Selection Jumper (J205)
Switch Selection Jumper (J211)
2.1
Kit Contents
The PIC32 WFI32E Curiosity Board kit contains the following:
• PIC32 WFI32E Curiosity Board that contains a WFI32E01PC module mounted on a WFI32E01 carrier board
• Type-A male to Micro-B USB cable
Note:
If any of the above items are missing in the kit, go to
support.microchip.com
or contact your local Microchip
sales office. A list of Microchip office for sales and services is provided on the last page of this document.
PIC32 WFI32E
Kit Overview
©
2020 Microchip Technology Inc.
User Guide
DS50003028A-page 6
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from