Ethernet-to-USB-C Data Dongle
If PoE power isn’t available, and wired Etherent
is required, the PD-USB-DP60 can be powered
from a USB Host:
1. Connect one side of the supplied USB Type-C
cable to the USB-C host.
2. Connect the other side of the USB Type-C
cable to the PD-USB-DP60’s USB-C socket.
3. Connect a standard Cat 5/5e/6 Ethernet cable
the PD-USB-DP60’s “PoE IN” RJ45 socket to
connect to an IEEE 802.3 10/100/1000 Mbps
network.
LED Indicators
LED
Appearance
Status
Power
No Light
PD-USB-DP60 is:
powered off or powered
on as a dongle
Yellow On PD-USB-DP60 is powered
on
Link/
Act
No Light
No data link
Green On
Data link on
Green
Blinking
Data activity on
