microchip.com
1. Connect an IEEE
®
802.3af/at/bt-compliant
PSE to the PD-USB-DP60’s “PoE IN” RJ45
socket using a standard Cat 5/5e/6 Ethernet
cable. (Note: The maximum allowed length
of the Ethernet cable is 100 meters).
2. Check that the “Power” LED is yellow to
verify that the PD-USB-DP60 is powered on.
3. Connect one side of the supplied USB
Type-C
®
cable to the PD-USB-DP60’s
USB-C socket. (Note: Any USB-C connec-
tion polarity is allowed.)
4. Connect the other side of the USB Type-C
cable to the USB-C powered device.
5. Verify that the USB-C powered device is
getting power from the PD-USB-DP60.
PoE IN
USB-C®
PD-USB-DP60 Quick Start Guide
