4.2
RJ45 Cable Installation
The following steps describe how to install the RJ45 cable to the midspan unit.
1.
Remove the upper cap, blank plug, and washer from the
DATA IN
port.
2.
Insert the cable through the upper cap and the washer and plug into the
DATA IN
port.
3.
Slide the washer and the upper cap towards the midspan and hand-tighten the upper cap onto the
DATA IN
port.
Note:
Secure the gland until the rubber gasket is firmly closed around the cable.
4.
Repeat step
to connect the RJ45 cable to the
DATA & PWR OUT
port.
Notes:
1.
Use cable up to 5 Gig Cat 5e and above outdoor grade.
2.
Use cable up to 10 Gig Cat 6 and above outdoor grade.
PD-9501-10GCO/DC
Installation of Cables
©
2022 Microchip Technology Inc.
and its subsidiaries
User Guide
DS50003347A-page 12
