Microchip Technology MPLAB ICE, Руководство пользователя

Страница: 159 / 192


2001 Microchip Technology Inc. DS51159B-page 159
MPLAB
®
ICE USER’S GUIDE
12
Appendix B. Pod Electrical Specification
B.1 Introduction
This section describes the hardware electrical specifications of the MPLAB
ICE in-circuit emulator pod.
Refer to MPLAB ICE Processor Module and Device Adapter Specification
(DS51140) for information on a specific processor module/ device adapter.
Refer to MPLAB ICE Transition Socket Specifications (DS51194) for
information on a specific transition socket.
B.2 Highlights
This appendix addresses the following electrical specifications of the emulator
pod:
• Power
• Parallel Port
• Indicator Lights
• Logic Probes
B.3 Power
Power to the MPLAB ICE system is supplied by an ex5V power supply
included with the system. The input is located on the back of the pod, as
indicated in Figure B.1. The power on/off switch is also located on the back of
the pod.
Figure B.1 MPLAB ICE Rear Panel
PARALLEL PORT
IN
+5VDC
I O
Power On
Power Off
Power Input
Communications
with PC