MGC3140
MGC3140 GestIC® Tuning User's Guide
Preface
Important:
Notice to customers:
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs and/or
tool descriptions may differ from those in this document. Please refer to our website
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
Introduction
This document describes how to tune GestIC
®
systems that consist of an MGC3140 gesture controller
based on Microchip's GestIC technology and Gesture sensor.
Recommended Reading
For the latest information on using the device, read the
“MGC3140 3D Tracking and Gesture Controller
(DS40002037) located on the Microchip website. The release notes (Readme) contain
update information and known issues that may not be included in this user’s guide. For the latest
information on using the Aurea GUI, refer to the
“Aurea Graphical User Interface User’s Guide”
(DS40001681) located on the Microchip website.
©
2018 Microchip Technology Inc.
User Guide
DS40002055A-page 1
