Microchip Technology MEB II, Руководство пользователя

Страница: 20 / 52

Multimedia Expansion Board II (MEB II) User’s Guide
DS70005148B-page 20
©
2013-2014 Microchip Technology Inc.
2.1.2 Starter Kit Connector
The starter kit connector, as shown in Figure 2-2 , is a high-speed, 168-pin Hirose FX10
board-to-board connector that is used to connect the MEB II to PIC32 starter kits.
FIGURE 2-2: STARTER KIT CONNECTOR
After connecting a PIC32 starter kit, applications can be developed and run using the
rich features of the MEB II.
Table 2-1 shows the Starter Kit Connector pin and the MEB
II component mapping.
CAUTION
When connecting the Multimedia Expansion Board II (MEB II) to a starter kit, do not
have power applied through either the starter kit or the DC power supply. Failure to
heed this caution could result in hardware damage.
TABLE 2-1: STARTER KIT CONNECTOR MAPPING
Starter Kit Connector MEB II
Pin
Number
Signal
Pin
Type
Component Description
1 SS1 O Audio Codec Left-Right Clock
64 RH3 O Audio Power Down
82 SDA2 I/O I
2
C Data
94 SDI1 I Audio Serial Data Output
96 REFCLKO1 O External Master Clock Input
112 SCL2 I/O Serial Clock
117 SDO1 O Audio Serial Data Input
118 SCK1 O Audio Bit Clock
7 RB1 O EBI-SRAM/Display Horizontal Sync.
68 EBIWE O Pixel Clock
77 RJ3 O Reset
78 EBICS2 O Chip Select
103 RB4 O Data Enable
108 RH9 O Vertical Sync
116 RH13 O Stand-by
131 EBID15 I/O R0
132 LCD_B7 I/O B7
133 LCD_R1 I/O R1
134 EBID3 I/O B6
135 LCD_R2 I/O R2
136 EBID2 I/O B5
137 EBID11 I/O R3