Microchip Technology MCP6 series, Руководство пользователя

Страница: 34 / 36

Bill of Materials (BOM)
©
2007 Microchip Technology Inc. DS51673A-page 30
TABLE B-2: BILL OF MATERIALS – UNPOPULATED PARTS (102-00153R1)
The BOM in Table B-3 corresponds to the collection of resistors, capacitorys, jumpers
and MCP6021 op amps that come in the Accessory Bag which is shipped in the
MCP6XXX Amplifier Evaluation Board 3 Kit. These components are placed in an
separate ESD bag. They support the circuit in
Section 2.4.1 “Building the Amplifier” .
Customers need to provide the resistors and capacitors for more amplifier circuits.
TABLE B-3: BILL OF MATERIALS – ACCESSORY BAG PARTS (102-00153R1)
Qty Reference Description Manufacturer Part Number
1 U1 MCP6021 PDIP-8, Single Op
Amp Microchip
Technology Inc MCP6021T-E/P
1 U2 MCP6021 SOIC-8, Single Op
Amp Microchip
Technology Inc MCP6021T-E/SN
7 R1-R4, RISO, RL,
CL Not Populated when shipped to
customer — —
Note 1: The components listed in this Bill of Materials are representative of the PCB assembly. The released BOM
used in manufacturing uses all RoHS-compliant components.
Qty Reference Description Manufacturer Part Number
1 Accessory Bag CAP CER 56PF 50V C0G
RADIAL Murata Electronics
®
RPE5C1H560J2P1Z03B
1 Accessory Bag JUMPER ZERO OHM 1/8W Yageo
®
Corporation ZOR-12-B-52
5 Accessory Bag RES 1.96K OHM 1/4W 1%
METAL FILM Yageo Corporation MFR-25FBF-1K96
1 ESD Sample Box MCP6021 Single OpAmp
PDIP-8
Microchip Technology Inc MCP6021-E/P
Note 1: The components listed in this Bill of Materials are representative of the PCB assembly. The released BOM
used in manufacturing uses all RoHS-compliant components.