Microchip Technology MCP4725 SOT-23-6, Руководство пользователя

Страница: 11 / 33

Quick Start Instructions
©
2007 Microchip Technology Inc. DS51669A-page 7
1.3.1 Getting Started with PICkit Serial Analyzer
This section describes how to evaluate the MCP4725 device using the PICkit Serial
Analyzer.
1.3.1.1 HARDWARE SET-UP
1. Connect the MCP4725 SOT-23-6 Evaluation Board and the PICkit Serial
Analyzer together using the J1 connector.
2. Connect a USB cable between the PICkit Serial Analyzer and a Personal
Computer.
3. Connect a Digital Voltmeter to V
OUT
and GND terminals on the MCP4725
SOT-23-6 Evaluation Board. Figure 1-2 shows the connection example.
FIGURE 1-2: MCP4725 SOT-23-6 Evaluation Board Test Set Up.
PICkit Serial Analyzer
MCP4725 SOT-23-6 Evaluation Board
USB Cable: Connected between the PicKit Serial analyzer and Personal Computer.
Analog Output Voltage (V
OUT
)
Connected to Voltmeter