Microchip Technology MCP3905A, Справочный проект, Страница: 5 / 24

MCP3905A/06A ENERGY METER
REFERENCE DESIGN
©
2009 Microchip Technology Inc. DS51565B-page 1
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
MCP3905A/06A Energy Meter Reference Design. Items discussed in this chapter
include:
• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Web Site
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the MCP3905A/06A Energy Meter Reference
Design as a development tool to emulate and debug firmware on a target board. The
manual layout is as follows:
• Chapter 1. “Product Overview” – Important information about the
MCP3905A/06A Energy Meter Reference Design.
• Chapter 2. “Installation and Operation” – Provides a detailed description of
each block, as well as instructions on how to get started with this board.
• Appendix A. “Schematics and Layouts” – Shows the schematic and board
layout diagrams for the MCP3905A/06A Energy Meter Reference Design.
• Appendix B. “Bill Of Materials (BOM)” – Lists the parts used to build the
MCP3905A/06A Energy Meter Reference Design.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.