MCP37X10-200 12-BIT SINGLE-CHANNEL
EVALUATION KIT USER’S GUIDE
2016 Microchip Technology Inc.
DS50002511A-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
MCP37X10-200 12-Bit Single-Channel Evaluation Kit. Items discussed in this chapter
include:
• Conventions Used in this Guide
DOCUMENT LAYOUT
This document describes how to use the MCP37X10-200 12-Bit Single-Channel
Evaluation Kit to demonstrate the performance of the MCP37X10-200 device family.
The manual layout is as follows:
•
– Important information about the
MCP37X10-200 12-Bit Single-Channel Evaluation Kit.
•
Chapter 2. “Installation and Operation”
– Includes instructions on how to get
started with the MCP37X10-200 12-Bit Single-Channel Evaluation Kit.
•
Appendix A. “Schematics and Layouts”
– Refer to the board's web page for
the complete Schematics and Layouts.
•
Appendix B. “Bill of Materials (BOM)”
– Refer to the board's web page for the
complete Bill of Materials.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
