Microchip Technology Humidity Sensor PICtail, Руководство пользователя

Страница: 13 / 32

HUMIDITY SENSOR PICTAIL™
DEMO BOARD USER’S GUIDE
©
2005 Microchip Technology Inc. DS51594A-page 9
Chapter 2. Setup and Installation
2.1 INTRODUCTION
This chapter shows how to set up the Humidity Sensor PICtail™ Demo Board. Items
discussed in this chapter include:
• Required Tools
• Connecting the Humidity Sensor PICtail™ Demo Board
• Set-up Verification
2.2 REQUIRED TOOLS
The PICkit™ 1 Flash Starter Kit User’s Guide explains how to set up the PC and the
PICkit™ 1 Flash Starter Kit. Use firmware version 2.0.2 or later.
The PICkit™ 1 Flash Starter Kit CD-ROM (DS40049) contains many of the necessary
files.
The
capacitance.exe
PC program comes with the Humidity Sensor PICtail™ Demo
Board CD-ROM (Version v1.07.01 or later).
2.3 SETTING UP THE HUMIDITY SENSOR PICTAIL™ DEMO BOARD
This section discusses the primary method for setting up the Humidity Sensor PICtail™
Demo Board. An exploded view of how the different boards connect is shown in
Figure 2-1.
FIGURE 2-1: Board Connections for PICkit™ 1 Flash Starter Kit.
PICkit™ 1 Flash Starter Kit
USB Cable
Expansion
Header (J3)
ICSP™ Header
Remove PICmicro
®
MCU
Evaluation Socket
PIC16C745 Firmware
Version 2.0.2 or later
To PC
Humidity Sensor
PICtail™ Demo Board