Microchip Technology EVB-LAN9360, Руководство пользователя

Страница: 24 / 38

EVB-LAN9360
DS60001706A-page 24

2021 Microchip Technology Inc.
4.1 LISTENER AND/OR TALKER WITH ON-BOARD CODEC
In this configuration the LAN9360 acts as Talker or Listener or both. The on-board
codec is used as PCM source and sink.
This configuration is the factory default configuration.
Table 4-2 gives an overview of the jumper settings for this configuration.
Figure 4-1 depicts the jumper settings on the EVB-LAN9360.
The audio source (stereo) for the AVB Talker is the blue jack connector (Line In).
The AVB Listener plays the received audio signal (stereo) through the green jack con-
nector (Headphone Out).
TABLE 4-2: LISTENER AND/OR TALKER WITH ON-BOARD CODEC –
JUMPER SETTINGS
Jumper Setting
J16 2-3
J17 Open
J18 1-2
J19
J20
FIGURE 4-1: LISTENER AND/OR TALKER WITH ON-BOARD CODEC – JUMPER SETTINGS
Note: It is not possible to directly connect an analog microphone (no power feed).