Software Development Kit
2015-2016 Microchip Technology Inc.
DS50002333C-page 33
3.3.2
Compiling and Programming SoC Firmware
1. Compile the source code (with corresponding configuration selected if HBI proj-
ect is loaded).
FIGURE 3-5:
MPLAB IDE COMPILE PROJECT SELECTION
2. If the compilation is successful, the output window will display “BUILD SUC-
CESSFUL”, as shown in Figure 3-6.
FIGURE 3-6:
MPLAB IDE BUILD SUCCESSFUL
3. Before initiating the firmware download, ensure the debugger/programmer is
connected to the EVB’s JTAG pins. (This demo project is debugged with the
PICkit-3 In-Circuit debugger/programmer).
4. To program the PIC32 SoC, click the “Make and Program Device Main Project”
button.
FIGURE 3-7:
MPLAB IDE PROGRAM DEVICE
