EV20F92A Serial Memory SPI Evaluation Kit User’s Guide
DS20006685A-page 12
2022 Microchip Technology Inc. and its subsidiaries
FIGURE 2-1:
GUI INSTALLATION LOCATION
6. The next step is to select the Start Menu folder. By default, the setup will create
a Start Menu folder named
Microchip
(if one is not already present on the user’s
PC). Press the
Next
button when ready to continue (
).
FIGURE 2-2:
GUI START MENU FOLDER
7. Once the Destination location and the Start Menu folder have been selected, the
setup will prompt the user if they are ready to install the software. Press the
Install
button when ready (
) and, once complete, the installation will
then install the various drivers. Follow the on-screen instructions to complete
driver installation.
