Microchip Technology DM330031 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 66

Microchip Technology DM330031 Скачать руководство пользователя страница 10

dsPIC33CK Low-Voltage Motor Control Board User’s Guide

DS50002927A-page 10



2020 Microchip Technology Inc.

1.2

FEATURES

Key features of the Motor Control Board are as follows:
• Three-Phase Motor Control Power Stage with the Following Electrical Specifications:

- Input DC voltage: 12V to 48V
- Nominal phase RMS current: 10A at +25°C ambient temperature

• Motor Phase Current Feedbacks to Implement Field-Oriented Control (FOC) of a

PMSM/BLDC Motor

• DC Bus Current Feedback for Overcurrent Protection and to Implement Single

Shunt Current Reconstruction Algorithm

• DC Bus Voltage Feedback for Overvoltage Protection
• Phase Voltage Feedbacks to Implement Sensorless Trapezoidal Control
• Hall Sensor Interface
• Quadrature Encoder Interface (QEI)
• On-Board Temperature Sensor for Monitoring the MOSFET Temperature
• Optional External Temperature Sensor (thermistor) Interface
• Debug Serial Interface (USB to UART)
• PICkit™ On-Board (PKOB4) for Programming and Debugging
• Two mikroBUS™ Sockets to Support Connectivity, Sensors and Communication

Interfaces by Plugging in mikroBUS Add-On Boards

• User Interface Elements:

- Two debug LEDs
- One potentiometer
- Three push buttons
- PWM indication LEDs
- Power-on status indication LED

• Auxiliary Power Supply to Power External Interfaces and On-Board Circuitry

«
...
8
9
10
11
12
...
»

Содержание DM330031



































































Отзывы:

Нет отзывов