Microchip Technology CAP1 Series, Руководство пользователя

Страница: 24 / 46

CAP1xxx Evaluation Board User’s Guide
DS50002221A-page 24

2013 Microchip Technology Inc.
4.10 Thresholds Control Panel
The Thresholds Control Panel, shown in Figure 4.12 , contains 4 tabs which are described below.
4.10.1 Active Tab
The Active tab of the Advanced window's Thresholds section, shown in Figure 4.12 , contains the
sensor input thresholds (registers 30h - 37h) that define the delta count level at which touches are
reported when the device is in the Fully Active state.
To quickly set all Active tab sensor input thresholds to the same value, ensure the 'Sensor 1 Updates
All' switch is in the up position, enter the desired value into the Sensor 1 data cell, and then click out
of the cell. To individually set Active tab sensor input thresholds, click the 'Sensor 1 Updates All' switch
so it’s in the down position and displays the label “Individual Sensor Updates”.
4.10.2 Standby Tab
The Standby tab of the Advanced window's Thresholds section shown in Figure 4.13 , contains sensor
input controls for the Standby power state.
Figure 4.12 Thresholds Control Panel - Active Tab Displayed