2.
WPA/WPA2
3.
WEP
Figure 2-7. Serial Command Line Interface
Figure 2-8. Wi-Fi Authentication Example
III. USB Programmer/Debugger interface
For users familiar with the Atmel Studio interface, the AVR microcontroller can also be programmed and
debugged directly via the Atmel Studio 7.0 IDE. The AVR-IoT development board is automatically
detected by the Atmel Studio IDE, enabling full programming and debugging through the on-board
nEDBG interface.
2.2
AVR-IoT Development on START
Atmel START, a quick development tool, can be used to select and customize additional code examples
including single-click support for 100+ Click sensor boards (out of the 450 models available so far). The
codes can be downloaded by clicking
Browse Examples
on the Atmel START page, as shown in
I. Generate the AVR-IoT Development Board Demo
To generate the microcontroller code used on the AVR-IoT development board, select
Browse Examples
from the Atmel START home page and follow these simple steps:
AVR-IoT WG User Guide
Chapter 2: Getting Started
©
2018 Microchip Technology Inc.
User Guide
DS50002809A-page 10
