1.
Introduction
1.1
Features
• ATtiny1627 Microcontroller
• One Yellow User LED
• One Mechanical User Switch
• Footprint for 32.768 kHz Crystal
• On-Board Debugger:
– Board identification in Atmel Studio/Microchip MPLAB
®
X IDE
– One green power and status LED
– Programming and debugging
– Virtual serial port (CDC)
– Two debug GPIO channels (DGI GPIO)
• USB Powered
• Adjustable Target Voltage:
– MIC5353 LDO regulator controlled by the on-board debugger
– 1.8-5.1V output voltage (limited by USB input voltage)
– 500 mA maximum output current (limited by ambient temperature and output voltage)
1.2
Kit Overview
The Microchip ATtiny1627 Curiosity Nano Evaluation Kit is a hardware platform to evaluate the ATtiny1627
microcontroller.
Figure 1-1. ATtiny1627 Curiosity Nano Evaluation Kit Overview
Micro USB
Connector
Debugger
Power/Status
LED
32.768 kHz
Crystal footprint
User LED
(LED0)
User Switch
(SW0)
ATtiny1627
MCU
ATtiny1627
Introduction
©
2020 Microchip Technology Inc.
User Guide
DS40002199A-page 4
