Figure 3-8. Hide Unsupported Devices
Info:
Atmel Studio allows any microcontroller and interface to be selected when the
Hide unsupported
devices
setting is set to
False
, also microcontrollers and interfaces which are not supported by the on-
board debugger.
3.5.3
Hardware Modifications
The on-board debugger is connected to the ATmega4809 by default. These connections must be removed before
any external microcontroller can be programmed or debugged. Cut the
GPIO straps
shown in the figure below with a
sharp tool to disconnect the ATmega4809 from the on-board debugger.
ATmega4809 Curiosity Nano
Curiosity Nano
©
2020 Microchip Technology Inc.
User Guide
DS50002804B-page 20
