Microchip Technology ATBTLC1000ZR-XPRO, Руководство пользователя

Страница: 9 / 18

Pin on EXT1 Function Description
12 TWI_SCL I
2
C SCL of AT30TSE758A
13 UART_TXD UART TX
14 UART_RXD UART RX
15 SPI_SS_A/
UART_TXD SPI SS or UART TX
16 SPI_MOSI/
UART_CTS SPI MOSI or UART CTS
17 SPI_MISO/
UART_RXD SPI MISO or UART RXD
18 SPI_SCK/
UART_RTS SPI Clock or UART RTS
19 GND Ground
20 VCC Target supply voltage
Info: Pins 15,16,17,18 can be configured as either UART or SPI on the host MCU.
Related Links
Xplained Pro Standard Extension Header
5.2.2 Current Measurement Header
Current Measurement header J109 can be used to measure the current consumed by the ATBTLC1000-
ZR110CA module using an ammeter. The two 0Ω resistors R111 and R112 can be removed to measure
the current consumed by individual power rails VDDIO and VBAT respectively by soldering in wires for an
ammeter.
5.2.3 Jumper Configuration on Pin headers
The ATBTLC1000 ZR Xplained Pro has few pin headers and jumpers to configure UART(with flow
control) or SPI interface with different pins on the extension header of the Xplained Pro MCU board. The
headers provided for this purpose are:
• 1x2 Pin headers (J101, J102, J103, J104) - 4
• 1x3 Pin headers (J105, J106, J107, J108) - 4
The pin headers and its functionality are mentioned in the table.
Table 5-3. Pin Headers and Functions
Pin on EXT1 Pin headers Function
5 J101 UART_CTS
6 J102 UART_RTS
13 J104 UART_TXD
14 J103 UART_RXD
ATBTLC1000ZR-XPRO
©
2017 Microchip Technology Inc.
User Guide
DS50002637A-page 9