MicroBT WhatsMiner M21S, Руководство по эксплуатации

Страница: 12 / 30

12 / 30
5.Miner Data Configuration
（
Configuration on
the web page
）
5.1.Query the dynamic IP address obtained by the miner
5.1.1.Run WhatsMinerTools software
Miner data configuration PC Connect to the same network segment network where the
machine is located, run WhatsMinerTools software on the PC, select the “Detect IP” tab,
set the room number, rack number and layer number of the rack where the mining
machine is located. , the location number of the layer, click "Start".
5.1.2.Check the IP address Reported by the Miner
（
1
）
After the machine is powered on for about 30s, under normal circumstances, the
yellow light of the network port is always on and the green light is blinking. Press the
IPFOUND function button (long button highlighted) on the miner control panel for more than
5s, the two LEDs on the right will flash a few times, indicating that the machine has broadcast
the IP and MAC address of the unit to the network.