MicroBT WhatsMiner M10S, Руководство по эксплуатации

Страница: 13 / 36

13
correctness of the calculation statistics, etc. depend on the network NTP time. The mining
machine itself is configured with multiple NTP server addresses of the public network by
default. In order to speed up the acquisition of network time and improve the time
precision, it is recommended to mine the network. Configure a local NTP server.
4.Miner Connection and Pre-Power Check
(1) Before the wiring and power-on of the machine, according to the warning signs
on the side of the machine, shake the machine to check whether there is a radiator or
other components falling off, to ensure that there is no radiator or other period to fall
off before wiring and power-on.
(2)
The machine is connected to the power wiring, and the network port is
connected to the switch. Check that the power control wiring, fan control wiring,
adapter board control wiring, and fan control wiring are not loose, and the copper line is
connected correctly before powering on the machine.\
Notes
：
（
1
）
When the power copper busbar is connected to the hash board, the positive
and negative poles of the copper busbar are not connected incorrectly, and the screw
washers of the fixed copper bar must be aligned parallel to the edge of the copper bar,
and the fixed screws must be tightened, otherwise the power board may be burned
out. , control board or power supply, hardware damage caused by copper stripping, is
not covered by the warranty.
（
2
）
The power control wiring between the control board and the power supply