background image

DVD Premium Pro LightScribe Series                          MICROBOARDS TECHNOLOGY, LLC 
 

 
 

14

SIMULATION              4.0GB 
DVD                              25% 

SIMULATION?? 
   (DISC to DISC) 

DISC ERASE? 
   (REWRITABLE) 

QUICK ERASE? 

FULL ERASE? 

SURE? 

DISC ERASE 

9.  Press YES and the Reader drive will eject and you can insert another master to register 

to the HDD. 

10.  Press NO and to exit this menu without registering data to the hard drive partition. 

 
Simulation Disc to Disc 

 

Important:

  Simulation is not allowed when using DVD+R/RW media.   

 

1.  At the COPY START? (DISC to DISC) menu, press 

the NO or 

 button until the display shows 

SIMULATION? (DISC to DISC). 

2.  Place the Master Disc into the Reader drive. 
3.  Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on 

the front of the Recorder(s) to stop blinking. 

4. Press 

YES. 

5.  The drive trays will open on any recorder without blank discs installed.  If you do not want 

to make a copy in those drives, close the tray(s), wait for the drive light to go out, and 
then press the YES button to start the copy job. 

6.  The display will now show the progress of the 

Simulation Copy Job. 

7.  The Recorder(s) will eject the DVD-R discs when the 

job is complete. 

Note:  

DVD-R media will NOT be recorded to in Simulation Mode. 

 

Erasing RW media 

 

1.  At the COPY START? (DISC to DISC) menu, press 

the NO or 

 button until the display shows DISC 

ERASE? (REWRITABLE): 

2.  Load the Recorder(s) with the CD-RW or DVD-+RW media you wish to erase.  You can 

erase one disc at a time or fill all the Recorders to erase multiple discs at once.  All discs 
loaded must be of the same type. 

3.  Press the YES button 
4.  The next screen asks if you want to perform a Quick Erase. 

If you wish to perform a Full Erase, press the NO button.   

Pressing the YES button at either of these selections will show the following screen: 

5.  Press the YES button if you are sure you want to erase the DVD-+RW disc.  If you do not 

wish to erase the disc, press the NO button and you will go back to the DISC ERASE 
screen (step 1). 

6.  The screen will now show: 
7.  Once the erasing is complete, the Recorder(s) will 

eject the disc(s). 

 

Содержание DVD Premium Pro LightScribe Series



























Отзывы:

Похожие инструкции для DVD Premium Pro LightScribe Series