microbeau Spektra Xion S, Руководство пользователя

Страница: 15 / 16

15
USER MANUAL
VOLTAGE PARAMETERS
While voltage is a parameter that will vary from artist to artist, it is safe to say that this machine
will operate at a minimum voltage of around 4 Volts with a maximum voltage of 9.5 Volts.
Depending on the type of needle configuration or brand you use, feel free to adjust the voltage to
obtain the desired performance.
Note: Exceeding 10.2 Volts is not recommended.
ACCEPTED NEEDLES
Use only Cartridge needles with internal membrane. This will avoid accidental contamination inside
your machine. Fluids such as ink, water or oil will void warranty of the device and may require
replacement of internal parts.
MAINTENANCE
• The machine is basically maintenance-free.
• Xion S is sold pre-lubricated from factory.
• Prevent any type of external elements entering the machine as these will disrupt the
motion of components and contaminate lubrication.
• The grip of the machine is autoclavable. Use only steam autoclaves at temperatures not higher
than 270° Fahrenheit or 132.222° Celsius. Add a hint of ointment or PTFE grease around
internal opening of grip for optimal functionality after autoclaving. Refer to page 5 for additional
information.
• Machine Body and MotorBolt can be sanitized from the outside with cold sterilization products.
• Never spray the surface directly to prevent fluids from entering the machine. Always use pads or
disposable paper towels to apply sterilization products.
• The mechanism relies on a return spring. DO NOT disassemble machine.
WARRANTY
• All the housing components (Grip, Machine Body and the Motor Housing) are covered by a
lifetime warranty.
• Internal parts are subject to wear and tear. The motor itself will be covered by a 1 year warranty
from the date of purchase.
• Motor warranty is void if motor shows signs of being dropped, internal fluids enter the motor
and/or motor shows signs of being tampered with in any way.
ADDITIONAL INFORMATION