P.20
8008_inst.7/7/04.qx
TYPE# 8: SINGLE WIRE MAZDA TYPE
-This Is Basically A PARTIALLY RESISTED (-)NEGATIVE PULSE System. Partially Resisted Because ONLY THE LOCK
COMMAND NEEDS A RESISTOR.
-The (-)NEGATIVE LOCK Command MUST Be Resisted Through A 1K OHM Resistor.
-The (-)NEGATIVE UNLOCK Command Is A Regular (-)NEGATIVE GROUND Pulse.
VEHICLE WIRE COLORS & LOCATIONS
Vehicle:
Mazda Protoge
Color:
White/Blue
Plug:
18-Pin White Connector (White/Blue Wire Is
Repeated 3 Times On This plug)
Location:
Driver’s Side Kick Panel
Vehicle:
Mazda 929
Color:
Light Green/Black (or) Yellow/Black
Plug:
20-Pin Black Connector 6-Pin White Connector
Location:
Driver’s Side Kick Panel Passenger Side Kick
Vehicle:
Mazda Mellenia
Color:
Red/Black (or) Blue/Yellow
Plug:
28-Pin White Connector 28-Pin White Connector
Location:
Driver’s Side Kick Panel Passenger Side Kick
ALARM
BLUE(UNLOCK)
GREEN
(LOCK)
(+) CONSTANT 12 VOLTS
USE 3.5 AMP FUSE
VEHICLE SINGLE LOCK/UNLOCK WIRE
GROUND
87
87A
85
30
86
1K OHM
RESISTOR
SINGLE WIRE MAZDA SYSTEM
TYPE# 9: SINGLE WIRE NISSAN & 1991 MAZDA MPV TYPE
-The 1991 MAZDA MPV And Some NISSANS Use This Type Of Single Wire System.
-To LOCK The Vehicle’s Doors The Single Wire Circuit Must Be Opened. This Is Done Through The Use Of A Relay.
-To UNLOCK The Vehicle’s Doors Only A Normal (-)NEGATIVE GROUND Pulse Is Needed. Therefore The UNLOCK
Command Is A (-)NEGATIVE Pulse.
VEHICLE WIRE COLORS & LOCATIONS:
Vehicle: 1991-1994 Nissan 240SX
Color:
Orange/ Blue (or) Orange/ Black
Plug:
Look For The Wires Coming from the Door
Location: Driver’s Side Kick Panel
Vehicle: 1992-1995 300ZX
Color:
Brown (or) Brown/ Yellow
Plug:
Look For The Wires Coming from the Door
Location: Driver’s Side Kick Panel
Vehicle: 1991 Mazda MPV
Color:
Green/White
Plug:
At The Door-Lock Control Module
Location: Behind The Glove Compartment
ALARM
BLUE(UNLOCK)
GREEN
(LOCK)
(+)
87
87A
85
30
86
CONSTANT 12 VOLTS
USE 3.5 AMP FUSE
MOTOR SIDE OF SINGLE LOCK/UNLOCK WIRE
SWITCH SIDE OF SINGLE
LOCK/UNLOCK WIRE
SINGLE WIRE NISSAN AND
1991 MAZDA MPV SYSTEM
SPECIAL NOTE: MICRO AUTO SECURITY IS NOT RESPONSIBLE FOR ACCURACY:
VERIFY ALL WIRE FUNCTIONS BEFORE MAKING CONNECTIONS!
Содержание 8008-04
Страница 22: ...P 22 8008_inst 7 7 04 qx NOTE...
Страница 23: ...p 23 8008_inst 7 7 04 qx NOTE...