Users Manual & Installation Guide
PV-
SERIES
: 16 D
IGITAL INPUTS
, 48 D
IGITAL OUTPUTS
Page
2 of 12
D
ESCRIPTION
Micronix PV-1648 lets you handle combined I/O from one single PC/104 board. The
PV-1648 module plugs into any standard PC/- 104 bus interface and provides you
with 16 digital opto-isolated inputs and 48 NPN non-isolated open collector digital
outputs (optional pull-up to +5V). Non-Stack-through or stack-through (S-versions)
connectors are available. Supplied with drivers for Windows 95/98 and NT.
F
EATURES AND SPECIFICATIONS
Inputs
•
Number of channels:
16 opto-isolated inputs, groups of two
•
Isolation:
Up to 1000 Vrms
•
Mix voltage range: ±30V
•
Current Limit Resistor:
10K
Ω
, 0.25W
•
Logic “1”
Uin < -10V, Uin > +10V
•
Logic “0”
-5V < Uin < +5V
•
Input delay:
ON: < 25 us
OFF: <100 us
•
Interrupts:
Int. 5,9,10,11,15 selectable on channel 0
•
Connector:
26-pin ribbon cable connector
•
Power requirement:
+5V DC, 50mA
Outputs
•
Number of channels:
48 non-isolated o.c. (optional pull-up), one common
GND, 4 groups of 12 bits
•
Voltage, load:
50V DC
•
Max current, load
400mA / BYTE
•
Max load per channel:
100mA
•
Saturation:
Max. 1.6V
•
Connector:
4 x 16-pin ribbon cable connector
Physical / Environment
•
Dimension:
95x90x18mm
•
Temperature range:
Operating:
0°C to 60°C at 1.5A
Storage:
-40°C to +85°C
•
Humidity:
0 to 90% RH, non-condensing
•
PC/104 Stack-through connectors (S-versions)
•
Optional cable for inputs: 26-pin header to DSUB-25F, 30cm
•
Optional cables for outputs: 16-pin header to DSUB-15F, 30 cm
