The Remote Control
POWER
switches
the
STB
ON
/
STANDBY
mode
.
MUTE
Temporarily turns
off sound volume.
0-9 Numerical keys
Enters
numeric
values
and
selects
the
channel
directly
by
entering
its
number
.
EPG
Displays the simple TV
Program guide.
CC
Chooses
Close
Caption
.
AUDIO
Changes
the
a
udio
.
INFO
Displays
the
program
information
box
in
the
screen
.
MENU
Opens
up
the
menu
or
return to the previous
menu.
SIGNAL
Displays
the
received
signal
strength
.
RATIO
Changes
the
display
aspect
ratio
.
DASH
Auxiliary select channel.
Increases
or
decreases
the
volume
.
Moves
the
cursor
to
the
left
/
right
menu
option
.
Changes
channels
.
Moves
the
cursor
to
the
up/down menu option.
ENTER
Enters
and
confirms
any
data
to
the
STB
in
the
menu
system
.
This
key
is
used
to
select
the
item
.
Press
while
viewing
TV
,
the
name
and
number
of
channels
is
displayed
.
When using the remote control, aim it at remote control sensor window on the unit, If there
is an
object between the remote control and the signal remote control sensor window on the
unit, the
remote
control
may
not
operate
.
Note: When using the remote control, please note:
Do not strike or drop the remote. Do not expose the remote control to liquids and do not place
it
in
humid
environments
.
Do not install or place the remote control in direct sunlight. The heat may damage the remote
control.
If the remote control sensor window on the unit is in direct sunlight or strong light, the remote
control may not operate normally. In this situation, change the light source or read just the angle
of your unit, or operate the remote control from a location closer to the remote control sensor
window on the display.
You will need to install the supplied batteries into the remote control to make it operate
following the instructions below.
1. Open the lid of the remote control battery
compartment.
2. Insert two size-AAA batteries.
Ensure that the batteries are inserted with the
positive
and negative terminals in the correct
direction
corresponding
to
the
(+)
and
(-)
marks
in the battery
compartment.
3. Install the lid of the remote control battery compartment.
The use of the wrong type of batteries may cause chemical leaks and/or explosion. Please
note
the following:
Always
ensure
that
the
batteries
are
inserted
with
the
positive
and
negative
terminals
in
the
correct direction as shown in the battery compartment.
Different types of batteries have different characteristics. Do not mix different types.
Do not mix old and new batteries. Mixing old and new batteries will shorten battery life and/or
cause chemical leaks from the old batteries.
When batteries fail to function, replace them immediately.
Chemicals which leak from batteries may cause skin irritation. If any chemical matter seeps
out
of the batteries, wipe it up immediately using a dry cloth.
Due to varying storage conditions, the battery life for the batteries included with your unit
may
be shortened. If the remote control is not used for a long period of time, remove
the
batteries.
Notes on Using Batteries
Batteries
Using the Remote Control
ENTER
ATSC TV RECEIVER
5
6
EXIT
Exits
a
menu
.
ATSC TV RECEIVER
/
/
Содержание MPI-500
Страница 1: ......
