manualshive.com logo in svg

MICRO-EPSILON scanCONTROL 25 100 Series, Руководство по эксплуатации, Страница: 9 / 60

Поделиться
Скачать
MICRO-EPSILON scanCONTROL 25 100 Series Скачать руководство пользователя страница 9

Page 9

Safety

scanCONTROL 25xx

1.4 

Intended Use

 - The scanCONTROL 25xx sensor is designed for use in industrial and laboratory areas.

 - It is used for

 

ƒ

Profile measurement

 

ƒ

Length measurement

 

ƒ

Quality monitoring and inspection of dimensions

 - The sensor must only be operated within the limits specified in the technical data, see Chap. 

3.2

.

 - The sensor must be used in such a way that no persons are endangered or machines and other material 

goods are damaged in the event of malfunction or total failure of the sensor.

 - Take additional precautions for safety and damage prevention in case of safety-related applications. 

1.5 

Proper Environment

 - Protection class for sensors:  IP 65 (applies only when connected output connectors or protective caps)

 - Operating temperature:  

0 ... +45 °C  (+32 ... +113 °F) (with free air circulation) 

 - Ambient pressure:  

Atmospheric pressure

 - Storage temperature: 

-20 ... +70 °C (-4 ... +158 °F)

 - Humidity:  

5 - 95 % (non condensing)

The protection class does not apply for the optical sections during operation as their soiling / contamination 

results in adversely affecting or failure of the function.
Only use shielded cables or original cables from the range of accessories for the connection to a power 

supply and for the outputs.
Note also the assembly and installation instructions, see Chap. 

5.

 

The IP 65 protection class is a specification which is limited to the protection with respect to dust and water. 

Oil, steam and emulsion penetration are not included in this protection class and must be tested separately.

Содержание scanCONTROL 25 100 Series





























































Отзывы:

Нет отзывов