Page 15
Warranty
RS232 Ethernet Converter
5.
Warranty
All components of the device have been checked and tested for perfect function in the factory. In the unlikely
event that errors should occur despite our thorough quality control, this should be reported immediately to
MICRO-EPSILON Eltrotec.
The warranty period lasts 12 months following the day of shipment. Defective parts, except wear parts, will be
repaired or replaced free of charge within this period if you return the device free of cost to MICRO-EPSILON
Eltrotec. This warranty does not apply to damage resulting from abuse of the equipment and devices, from
forceful handling or installation of the devices or from repair or modifications performed by third parties.
No other claims, except as warranted, are accepted. The terms of the purchasing contract apply in full.
MICRO-EPSILON Eltrotec will specifically not be responsible for eventual consequential damages. MICRO-
EPSILON Eltrotec always strives to supply the customers with the finest and most advanced equipment. De
-
velopment and refinement is therefore performed continuously and the right to design changes without prior
notice is accordingly reserved. For translations in other languages, the data and statements in the German
language operation manual are to be taken as authoritative.
6.
Service, Repair
In the event of a defect on the RS232 Ethernet
converter, please send us the RS232 Ethernet con-
verter for repair or exchange.
In the case of faults the cause of which is not clear-
ly identifiable, the whole RS232 Ethernet converter
must be sent back to
MICRO-EPSILON Eltrotec GmbH
Manfred-Wörner-Straße 101
73037 Göppingen / Germany
Tel: +49 (0) 7161 / 98872-300
Fax: +49 (0) 7161 / 98872-303
www.micro-epsilon.com
7.
Decommissioning, Disposal
Disconnect all cables from the RS232 Ethernet converter.
The RS232 Ethernet converter is produced according to the direction 2011/65/EU, „RoHS“.
Do the disposal according to the legal regulations (see directive 2002/96/EC) EG).