MICRO-EPSILON ILD1900-10-IE, Руководство по эксплуатации

Страница: 75 / 118

Page 75
PROFINET, Documentation
optoNCDT 1900 / Profinet
8.6.3.3 Measurement Configuration, Measuring Rate, Evaluation Range (ROI), Exposure, Peak Selection, Error Handling
Data recording
Name Parameter ID Data type Description Unit Access
Measurement task 51000 UINT8
Measurement task, object properties
0 - Standard
2 - Penetration
1 - Multisurface
rw
Measuring rate 51002 FLOAT
Free measuring rate; 250 ... 10,000 Hz;
Max. bus cycle 1 kHz, max. oversampling 8
Hz rw
Start of range 51009 UINT16 Start of evaluation range % rw
End of range 51010 UINT16 End of evaluation range % rw
Shutter mode 51019 UINT8
Exposure mode, automatic or manual
0 - Manual
1 - Automatic
rw
Shutter value in µs 51020 FLOAT Exposure time for manual mode; 1 ... 4000 µs µs rw
Exposure mode 51021 UINT8
Automatic exposure selection
0 - Standard
2 - Background
1 - Intelligent
rw
Peak selection 51029 UINT8
Peak selection video signal for distance calculation
0 - Highest peak
2 - Last peak
1 - Widest peak 3 - First peak
rw
Error handling type 51039 UINT8
Behavior of digital output in case of error
0 - None
2 - Infinite
1 - Value
rw
Error handling values 51040 UINT32 Hold value for 1 ... 1024 measuring cycles rw
An example of a conversion for the measuring rate in the TIA Portal can be found in the section on float parameters, see Fig. 45 .
An example of an implementation for peak selection in the TIA Portal can be found in the section on integer parameters, see Fig. 48.