MICRO-EPSILON IF2030/ENETIP Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 44

background image

Page 28

Liability for Material Defects

IF2030/ENETIP

6.

Liability for Material Defects

All components of the device have been checked and tested for functionality at the factory. However, if de-

fects occur despite our careful quality control, MICRO-EPSILON or your dealer must be notified immediately.
The liability for material defects is 12 months from delivery. Within this period, defective parts, except for

wearing parts, will be repaired or replaced free of charge, if the device is returned to MICRO-EPSILON with

shipping costs prepaid. Any damage that is caused by improper handling, the use of force or by repairs or

modifications by third parties is not covered by the liability for material defects. Repairs are carried out exclu-

sively by MICRO-EPSILON.
Further claims can not be made. Claims arising from the purchase contract remain unaffected. In particular,

MICRO-EPSILON shall not be liable for any consequential, special, indirect or incidental damage. In the inter-

est of further development, we reserve the right to make design changes without notification.
For translations into other languages, the German version shall prevail.

7.

Service, Repair

Please send us the affected parts for repair or exchange.
If the cause of a fault cannot be clearly identified, please

send the entire measuring system to:

MICRO-EPSILON MESSTECHNIK

GmbH & Co. KG

Koenigbacher Str. 15

94496 Ortenburg / Germany

Telephone: +49/8542/168 - 0

Fax: +49/8542/168 - 90

[email protected]

www.micro-epsilon.com

8.

Decommissioning, Disposal

Remove all cables from the interface module.

Incorrect disposal may cause harm to the environment.

Dispose of the device, its components and accessories as well as the packaging materials in compli-

ance with the applicable country-specific waste treatment and disposal regulations of the region of use.

«
...
26
27
28
29
30
...
»

Содержание IF2030/ENETIP













































Отзывы:

Нет отзывов

Похожие инструкции для IF2030/ENETIP

Concord express

Бренд: GE Страницы: 3

Бренд: Bard Страницы: 8

Бренд: Bardiani Valvole Страницы: 35

Бренд: Salda Страницы: 20

Бренд: Racal Instruments Страницы: 94

Бренд: Racal Instruments Страницы: 97

Бренд: Paradox Страницы: 32

Бренд: VAT Страницы: 39

Бренд: Samson Страницы: 124

Бренд: Samson Страницы: 86

Бренд: VAC Страницы: 5

Бренд: Ublox Страницы: 2

Бренд: u-blox Страницы: 19

Бренд: Watlow Страницы: 59

Tekmar WiFi Snow Melting Control 670

Бренд: Watts Страницы: 48

Бренд: J+J Страницы: 4

Бренд: Val Controls Страницы: 6

MicroTech II UV05

Бренд: AAF Страницы: 50

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды