Page 12
Liability for Material Defects
IF2008 ETH
5.
Liability for Material Defects
All components of the device have been checked and tested for functionality at the facto-
ry. However, if defects occur despite our careful quality control, MICRO-EPSILON or your
dealer must be notified immediately.
The liability for material defects is 12 months from delivery. Within this period, defective
parts, except for wearing parts, will be repaired or replaced free of charge, if the device
is returned to MICRO-EPSILON with shipping costs prepaid. Any damage that is caused
by improper handling, the use of force or by repairs or modifications by third parties is
not covered by the liability for material defects. Repairs are carried out exclusively by
MICRO-EPSILON.
Further claims can not be made. Claims arising from the purchase contract remain unaf-
fected. In particular, MICRO-EPSILON shall not be liable for any consequential, special,
indirect or incidental damage. In the interest of further development, MICRO-EPSILON
reserves the right to make design changes without notification.
For translations into other languages, the German version shall prevail.
6.
Service, Repair
If the interface module is defective please
send us the affected parts for repair or ex-
change.
If the cause of a fault cannot be clearly identi-
fied, please send the entire measuring system
to:
MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Koenigbacher Str. 15
94496 Ortenburg / Germany
Tel. +49 (0) 8542 / 168-0
Fax +49 (0) 8542 / 168-90
[email protected]
www.micro-epsilon.com
7.
Decommissioning, Disposal
Remove all cables on the interface module.
Incorrect disposal may cause harm to the environment.
Dispose of the device, its components and accessories, as well as the packaging
materials in compliance with the applicable country-specific waste treatment and
disposal regulations of the region of use.
Содержание IF2008 ETH
Страница 23: ......
