MICRO-EPSILON capaNCDT 6110 Скачать руководство пользователя страница 14

Page 14

Operation and Maintenance

capaNCDT 6110 / 6112 / 6120

Operation and Maintenance

Please note for operation and maintenance:

  Ensure that the sensor surface is always clean.
  Before cleaning, turn off the supply voltage.
  Clean with a damp cloth and then rub the sensor 

surface dry.

If the target has been changed or operating periods are 

very long, minor losses in operating quality are possible. 

You can correct these long-term errors by recalibrating.

  Disconnect the power supply before touching the 

sensor surface. 

 

> Static discharge, danger of injury
If the cause of a fault cannot be clearly determined, al-

ways send the complete measurement system. In case 

of a defect in the controller, the sensor or the sensor 

cable, send the affected parts for repair or exchange.

MICRO-EPSILON MESSTECHNIK  

GmbH & Co. KG

Koenigbacher Str. 15

94496 Ortenburg / Germany

Tel. +49 (0) 8542 / 168-0 / Fax +49 (0) 8542 / 168-90 

[email protected] / www.micro-epsilon.com

Liability for Material Defects

All components of the device have been checked and 

tested for functionality at the factory. However, if defects 

occur despite our careful quality control,  

MICRO-EPSILON or your dealer must be notified imme-

diately.
The liability for material defects is 12 months from deliv-

ery. Within this period, defective parts, except for wear-

ing parts, will be repaired or replaced free of charge, if 

the device is returned to MICRO-EPSILON with shipping 

costs prepaid. Any damage that is caused by improper 

handling, the use of force or by repairs or modifications 

by third parties is not covered by the liability for material 

defects. 
Repairs are carried out exclusively by MICRO-EPSILON.
Further claims can not be made. Claims arising from the 

purchase contract remain unaffected. In particular,  

MICRO-EPSILON shall not be liable for any consequen-

tial, special, indirect or incidental damage. In the interest 

of further development, MICRO-EPSILON reserves the 

right to make design changes without notification.
For translations into other languages, the German ver-

sion shall prevail.

Содержание capaNCDT 6110

















Отзывы: