MICRO-EPSILON 4350127.256, Руководство по эксплуатации

Страница: 57 / 173

Page 57
Appendix
thicknessCONTROL MTS 8202.LLT / 4350127.256
9. Appendix
9.1 Mechanical Equipment Documentation
The installation site should preferably be free of contaminants such as dust or fumes. These can result in measure-
ment uncertainties. If needed, use an optional air purging function on the sensors to reduce the accumulation of dust,
etc. on the glass panes for the laser and the receiver.
The installation site should be free of vibration.
The DWF-Viewer program on the supplied CD must be installed to display the design. Using this tool, all the individu-
al components of the system can be displayed after opening file 4350127(256)-01.dwf.
max. travel range 1700
143.7
0
190
388
(measurement range start) 435
(measurement range end) 495
543
740
804.3
(passline) 444
80
0
564
laserline
634 899 594
1750
1864 2272 2370 2535
1320.8
405
404
Fig. 54 Dimensional drawing of measuring machine, dimensions in mm (inches), not to scale
Install the measuring machine using screws type M6.
9.2 Terminal and Circuit Diagrams
9.3 Technical Data
9.4 scanCONTROL LLT 2900 Manual
9.5 One-Way Light Barrier Manual
9.6 UPS Manual
9.7 Interface