MICRO-EPSILON 4350127.256, Руководство по эксплуатации

Страница: 19 / 173

Page 19
Overview of Mechanical Components
thicknessCONTROL MTS 8202.LLT / 4350127.256
Fig. 18 Measuring machine in the wooden box
Undo the transport locks (lashing straps/cable ties on the base frame) , see 4.2 .
Place the round slings onto the two transport eyebolts. Attach the round slings to a
cross member. Do not lift the measuring machine.
Make sure that the load direction points vertically upwards.
1
1 Transport eyebolt
Fig. 19 Transport eyebolts on the measuring machine
i
The measuring machine must always be transported using the two eyebolts and a
cross-beam , see Fig. 19 .
Remove the four screws of the transport locking closures on the bottom of the
wooden crate. Use an Allen (hexagonal) key and an open-end wrench to do this.
1
1 Transport lock
Fig. 20 Locking screw for transportation of the measuring machine
Lift the measuring machine for approx. 6 cm and remove the bottom of the transport
box.
Position the measuring machine at its final destination. Use a crane or a forklift for
this.