MCS-WIRELESS-MODEM
REVISION 2.0
5
Chapter - 2. INSTALL
CRADLEPOINT
COR | USER MANUAL Firmware ver. 5.0.0
© 2014
CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 14
2.2.1
Attaching the COR to the Mounting Bracket
1) Attach the bracket to the wall or other surface with screws.
NOTE: Screws are not provided because the type of screw required
depends on the mounting surface.
2) Place the router’s edge
against the bottom of the
bracket.
3) Press the router down
firmly, then push it inside
the bracket. It should
latch.
2.1. ATTACHING THE MCS-WIRELESS-MODEM TO THE MOUNTING BRACKET
1) Attach the bracket to the wall (indoors, dry location) or other surface with screws.
NOTE: Screws are not provided because the type of screw required depends on the
mounting surface.
2.2. LOCATION- DRY/INDOORS
2) Place the router’s edge against the bottom of the bracket.
3) Press the router down firmly, then push it inside the bracket.
It should latch.
