MICRO-AIR FORCE FRP4, Инструкция по установке и эксплуатации

Страница: 5 / 33

5
FRP MICRO AIR
®
CLEAN AIR SYSTEMS
INSTALLATION:
INSPECTION:
The Micro Air dust collector is shipped on one or more
skids. All skids should be inspected for any visible damage
that may have occurred during shipment.
Report any damage to the delivery carrier.
CODES:
Codes may regulate recirculating fi ltered air in your facility.
Consult with the appropriate authorities having jurisdiction
to ensure compliance with all national and local codes
regarding recirculating of fi ltered air.
Codes may regulate acceptable locations for installing dust
collectors. Consult with the appropriate authorities having
jurisdiction to ensure compliance with all national and local
codes regarding dust collector installation.
Collectors must be anchored in a manner consistent with
local code requirements. Anchors must be suffi cient to
support dead, live, seismic, and other anticipated loads.
SUGGESTED EQUIPMENT & TOOLS:
Crane or Lift truck
Clevis Pins and Clamps
Lifting Straps or Chain Drift Pins
Spreader Bars Pipe Sealant
Socket Wrenches Screwdrivers
Pipe Wrenches Drill and Drill Bits
1/2” diameter anchor bolts End Wrenches
Adjustable Wrench Level
SET-UP
1. Determine the location where the unit is to be installed.
Be sure to allow suffi cient room to access the unit for
servicing and maintenance on all sides.
2. Lift the unit with a lift truck or overhead crane rated to
support the dust collectors weight. Use all the lifting
lugs provided and lift in a method described in Figure
1, 2 or 3.
3. Bolt on each of the legs with the hardware provided
(Figure 4).
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4