MICRO-AIR DDT4830, Инструкция по установке и эксплуатации

Страница: 5 / 10

MICRO AIR
®
DDT
CLEAN AIR SYSTEMS
4
DDT MICRO AIR
®
CLEAN AIR SYSTEMS
5
5
DDT HOPPER DROP-OUT KIT INSTALLATION PROCEDURE
This Kit Includes:
ITEM PART NO. DESCRIPTION QTY.
1 37835-01 Hopper Drop-Out (1 Collar) 2
37835-02 Hopper Drop Out (2 Collars) Optional
2 P3543 Self Drilling/Tapping Screws 24
3 37848-01 Drop Out Blank Plate 2
37815-01 Collar Optional
INSTALLATION
1. Remove Hopper Drop-Out kit from packaging. Inspect for any possible damage incurred during shipment. If this is
a new table assembly can be done while table is upside-down.
! CAUTION
Some assembly steps may require lifting and should only be done using proper lifting techniques.
2. Remove backing and place foam on Drop-Out flanges.
3. Line up hole pattern on Hopper Drop-Out flanges with hole pattern on Hopper. The Drop-Out Assembly
can be rotated to accommodate duct location.
4. Screw in twelve screws.
NOTE: Drop-Out Blank Plate can be modified to allow for custom Drop-Out containers.
5. Remove backing and place foam on the Blank Drop-Out Plate.
6. Line up hole pattern on Drop-Out Blank Plate with hole pattern on flanges of Hopper Drop-Out.
7. Attach Drop-Out Blank Plate using provided 1/4” hardware.
8. Hopper Collar can be substituted for the Drop-Out Blank Plate (As Shown in
FIG. 4 ).
9. Repeat for second hopper.
ITEM PART NO. DESCRIPTION QTY.
4 P164 1/4-20 Hex Bolt 12
P1729 1/4 Washer 24
P203 1/4-20 Nut 12
P242 1/4 Lock Washer 24
5 P1031 1/4 x 1/2 Foam 160 Inches
2
1
5
4
3
FIG. 4