manualshive.com logo in svg

Micrel KSZ8895, Руководство пользователя

Поделиться
Скачать
Micrel KSZ8895 Скачать руководство пользователя страница 25

KSZ8895 Evaluation Board User’s Guide 

Micrel Inc. 

Page 25 

1/8/2013 

5.7 Window SPI Software Tool  

5.7.1 Window SPI software installation 

The software tool can be used to read/write all of registers of the KSZ8895. 
The installation file of the tool is located in folder of Window SPI_I2C_MIIM Tools in the software 
tools folder of the Design Kit, there is MicrelSwitchPhyTools_1.xx.msi file which is clicked to 
install application file and add two application icons on the desktop, this installation just do one 
times only, the application file will be copied into the folder of Micrel\MicrelSwitchPhyTools 
(default) or other assigned folder in the installation. 
The MDC/MDIO SPI Software Tool can be executed directly by clicking its application file or icon 
with name of MicrelSwitchConfigApp on the desktop. 

 

5.7.2 On board jumper setting and Software Application 

 
Before run the software tool, the JP9 should be closed, please check the SPI setting in section of 4.3 
SPI mode. After click its icon, a control Window will be pop up as follow: 
 

 

The default is SPI interface to do switch configuration. From the device selection window to select 
any KS8895 devices and press Continue button. A control window will be pop up as follow. 
All register can be read/ written in the window. 

Содержание KSZ8895





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды