MICOM-2BT Trunk Mount Installation
1
General
This document describes installation of the MICOM-2BT radio in the trunk of a
vehicle. The instructions cover only aspects which are specific to trunk
installation. All other installation instructions are in the Installation section on
pages 25-33 of the MICOM-2 HF-SSB Transceiver Owner’s Manual
(68P02941C60-O). Before proceeding with your installation, read this section in
its entirety.
The MICOM-2BT trunk mount model uses a control head, speaker and
microphone in the passenger compartment, while all other radio components are
installed in the trunk of the vehicle.
Figure 1: MICOM-2BT Control Head
Model Complements
FMN1615A
Hand microphone
FKN4345A
DC cable
FLN2813A
Control head unit base
FLN2413B
Low RF assembly
FLN2419A
Radio blank panel
FLN2502A
High power unit
HKN6098A
Control cable O/C
HLN6615A
Remote trunion mounting kit
S135AD
Digital noise blanker
0102703K65
RSS programming cable
FBN5799A
Packing
HSN4027A
8
Ω
5 1/2" external speaker
FLN2272A
Mobile mounting kit
54MB000002 Danger
Programming
Instructions
68MB000006
Trunk Mount Installation Instructions
6802941C60
MICOM-2 HF-SSB Transceiver Owner’s Manual
