Disarm manually
Cut Off / Resume Fuel
Overspeed Alarm
Setting
Vibration Alarm
Setting
DISARM#
RELAY,A#
A=1/2;
1: Enable relay immediately
2: Enable relay safely [STATE] ON/OFF
1. RELAY,1#
A is set to 1, the relay command will be executed
immediately;
2. RELAY,2#
A is set to 2, the relay command will be executed safely.
The vehicle is safe only when the speed is lower than
20km/h if GPS is fixed, or the vehicle is stationary if GPS
is not fixed.
A=ON/OFF, open or close over speed alarm, default
：
OFF
B=1
～
255(km/h), speed limit, default
：
100(km/h);
C=0/1, way of alarm, 0 : GPRS only,
1: SMS+GPRS, default
:
1.
RELAY,0#
SPEED,[A][,B][,C]#
SPEED,OFF#
SENALM,[A][,M]#
A=ON/OFF, default: OFF;
M=0/1/2, way of alarming,
0 :GPRS only, 1: SMS+GPRS,
2 : GPRS+SMS+phone call, default:2
SENALM,OFF#
Set the device out of arm mode
Functions
Command Format
Explanation
SHIFT,[A][,B][,M]#
SHIFT,OFF#
Shift Alarm Setting
Example: SHIFT,ON,100,1# ( Means Setting 100 meters shift
alarm range, when the ignition turned off, vehicle’s 100
meters’ shift will trigger the alarm. )
A=ON/OFF; default:ON
B=Shift Distance (Range: 100-9999m)
M=0/1/2; way of alarm, 0 : GPRS only,
1: SMS+GPRS,
2: GPRS+SMS+CALL, default:1
ACCARM,ON,M#
ACCARM,OFF#
Auto Arm By ACC
Arm Time: M=5-1800s, default: 60s
Close auto arm function
ACCALM,ON,A#
ACCALM,OFF#
ACC Status Change
Alarm
Alarm Ways
：
A=0/1/2; way of alarm, 0 : GPRS only,
1: SMS+GPRS, 2: GPRS+SMS+CALL, default:1
Cancel ACC alarm function