b. Voice Monitor:
* Set center number by this sms command:
CENTER,A,center number#
* Configure SOS numbers for the tracker by this sms com-
mand:
SOS,A,1st number,2nd number,3rd number#
3 SOS numbers supports at the most
* Enable the device to enter into arm mode by this sms
command:
ARM#
* Configure the alarm ways by this sms command:
TEARDOWN,A,M#
For example:
* Switch the tracker to voice monitor mode
by this sms command:
MONITOR#
c. Vibration Alert:
This vibration alert function just work under stationary
status. How to use this function:
d. Tearndown Alert
* Enable the device to enter into arm mode by this
sms command:
ARM#
* Conifgure the alarm ways by this sms command:
SENALM,[A][,M]#
A=ON/OFF, default: OFF;
M=0/1/2, way of alarming,
0 :GPRS only, 1: SMS+GPRS, 2: GPRS+SMS+phone call, default:1
A=ON/OFF; default:ON
M=0/1/2; way of alarm,
0 : GPRS only, 1: SMS+GPRS, 2: GPRS+SMS+CALL, default:1
* Configure SOS numbers for the tracker by this sms
command:
SOS,A,1st number,2nd number,3rd number#
3 SOS numbers supports at the most
* Keep the device under stationary status more than 5min to let it enter into sleep arm mode;
* Vibrate the device then the tracker will send the vibration alarm messages
* Dial the sim number of the tracker from the center
number, then the tracker will pick up the call automatically
and you will can remote monitor the voice around it.
CENTER,A,123456#
MONITOR#
SET CENTER NUMBER OK
SET MONITOR MODE OK
ML808G
For example:
SOS,A,123456#
SET SOS NUMBER OK
ARM#
SET ARM MODE OK
SENALM,ON,1#
SET VIBRATE ALARM OK
ML808G
For example:
SOS,A,123456#
SET SOS NUMBER OK
ARM#
SET ARM MODE OK
TEARDOWN,ON,2
SET TEARDOWN ALARM OK
ML808G