Command
Type
Command
Format
Explanation
Example
MOTION
MOTION,[SENSE],
[DELAY]#
[SENSE] The sensitivity, 0 : Disable
warning. 1 ~ 9 : Enable warning.
1 is the most sensitive, 9 is the
least sensitive.
[DELAY] The delay time before a
warning is emitted (in seconds)
MOTION?
Check the current motion setting
Check the current sensitivity setting
Check the current shift setting
MOTION,2,5#
Trigger motion warning when an
enough vibration continues 5 seconds
MOTION#
Disable motion warning
SHOCK,1.7#
Trigger shock warning when a
vibration is beyond 1.7g
SHOCK#
Disable shock warning
SHOCK
SHOCK,[SENSE]#
[SENSE] The sensitivity (in g)
0 : Disable warning. Non-zero:
Enable warning. e.g. 1.7 means
that shock warning will be triggered
if shock vibration beyond 1.7g.
SHOCK?
SHIFT,100#
SHIFT
SHIFT,[RADIUS]#
[RADIUS] The radius of shift fence
(in meters) 0: Shift fence is
disabled >0: Shift fence is enabled.
SHIFT?
NOTE: This command requests to
enable/disable a shift fence in device.
Shift fence is an automatic fence.
It becomes valid whenever ACC is
OFF, and returns invalid when ACC is
ON. When ACC is OFF and car moves
out of it, a shift warning will be
triggered. In order to make it to work,
ACC line must be connected correctly.
RELAY,1#
[PATTERN] is set to 1, the relay
command will be executed
immediately.
RELAY,2#
[PATTERN] is set to 2,
the relay command will be executed
safely. The vehicle is safe only when
the speed is lower than 20km/h if
GPS is fixed, or the vehicle is
stationary if GPS is not fixed.
RELAY,0#
Recover the relay.
RELAY
RELAY,[PATTERN]#
RELAY?