2
3
2250 kg Hydraulic JAck
User Guide
SAVE THESE INSTRUCTIONS!
For your safety, read, understand, and follow the information
provided with and on this jack. Car jack owners and users must be thoroughly familiar with the
safety procedures for car jack use before using it for the first time. The owner and operator
must be aware that use and repair of this product may require special skills and knowledge.
Instructions and safety information shall be conveyed in the operator‘s native language before
use of this jack is authorized. If any doubt exists as to the safe and proper use of this jack,
remove from service immediately.
Inspect before each use.
Do not use if broken, bent, cracked, if certain parts are damaged or
rusted (including nameplates) or oil is leaking. Any jack that appears damaged in any way,
operates abnormally or is missing parts, shall be removed from service immediately. If the jack
has been, or suspected to have been, subjected to a shock load (a load dropped suddenly,
unexpectedly upon it), immediately discontinue use and remove from service. If a malfunction
occurs during use (seized lifting rod, plunger stuck), contact a professional or customer service.
In the event of an oil leak, discontinue use. Ensure no further oil leaks and immediately absorb
the oil which has leaked and dispose through designated facilities.
It is recommended that an
annual inspection be done by qualified personnel.
PRODUCT DESCRIPTION / SAFETY INSTRUCTIONS
This MICHELIN 2250 kg Hydraulic Jack is designed to lift, but not sustain, rated capacity loads.
It is designed to be used in conjunction with jack stands. The MICHELIN 2250 kg Hydraulic Jack
has a unique feature which provides fast, no load lifts to the jacking point.
Intended use:
To lift one axle of a vehicle for the purpose of service and / or repair of vehicle
components. After lifting, loads must be immediately supported by appropriately rated jack
stands. Check with vehicle owner‘s manual for proper jacking points.
BEFORE USE
1. Verify that the product and the application are compatible, if in doubt call the Customer
Support: +49 (0) 7131 27588-44.
2. Before using this product, read the owners manual completely and familiarize yourself
thoroughly with the product, its components and recognize the hazards associated with
its use.
3. Check to ensure that the jack rolls freely and that the pump operates smoothly before
putting into service.
EN
SPECIFICATIONS
Maximum rated load:
2,250 kg
Minimum hight:
150 mm
Maximum hight:
530 mm
Hoisting:
380 mm
Operating temperature:
-20 °C to +50 °C
