Michael Todd HAIR ERASER, Инструкция по эксплуатации

Страница: 17 / 22

HAIR ERASER | 15
Problem Potential Cause Solution
Skin irritation
occurs
You used the epilator for the first time
or
it’s been a long time since your last
use.
Some skin irritation may occur the first
few times you use the device. This is
absolutely normal and usually disappears
quickly.
You have applied too much pressure
with the device.
Do not use any pressure when moving the
device over the skin.
It
’s
impossible
to remove the
Epilating
Head.
You did not move the Epilator Head in
the right direction.
It
’s
impossible
to remove the
Clipping
Head.
Reduced
clipping
performance
The Clipping Head may not be clean.
Switch off the device, unplug it and
remove the Clipping Head. Then clean the
cutter unit and the Clipping Head with the
cleaning brush supplied. Remove any hairs
that are stuck under the trimmers.
Stronger skin
irritation than
usual after
clipping
The cutter unit is damaged or worn. Replace the cutter unit.
You did not move the Clipping Head in
the right direction
Press the release button and move the
Epilating Head in the direction of the
arrow (Pg 12 , Fig. 14) to remove it.
Press the release button and move the
Clipping Head in the direction of the
arrow (Pg 12, Fig. 14) to remove it.
TROUBLESHOOTING