Each individual string can be adjusted to the proper height by turning the two small allen screws on each saddle.
The 1.5 mm allen wrench supplied with your guitar will be needed to make this adjustment. When making
adjustments make sure the saddle height follows the radius of the fretboard. CAUTION - When changing your
string action be very carefull not to damgage the individual piezo transducer crystals on each saddle.
Magnetic Pickup/Acoustic Piezo Transducer Selection
The 3-way toggle located on the upper bout of the 55 Hybrid is for selecting the magnetic pickup, acoustic
piezo transducers, or blending the two together. When the switch is up the magnetic pickups are engaged.
When the switch is in the middle position both the magnetic and piezo acoustic transducers are engaged.
When the switch is in the down position the acousitic piezo transducers alone are engaged.
Volume, Magnetic Pickup Selection, and Tone Controls
The 3-way blade switch on the chrome control plate is used for selecting which magnetic pickup will be used.
Position one engages the bridge pickup. Position two engages the neck and bridge pickup together. Position
three engages the neck pickup alone. The next control is the volume control for the magnetic pickups. The last
control on the plate is the tone control for the magnetic pickups. The wooden knob on the body of the guitar is
the volume control for the acoustic piezo transducer.
Hybrid 55 Owners Manual
String
Action
Controls
2
MichaelKellyGuitars.com
