Miccus Swivel Jack RTX MSMSH-50, Руководство пользователя, Страница: 11 / 20

Tips for quicker, easier pairing.
•
Fully charge the Swivel Jack RTX first.
•
Bring the Swivel Jack RTX and your Bluetooth® device physically
close together, no more than 3ft apart.
•
Turn off any previously paired devices, Bluetooth headphones,
speakers, adaptors so the Swivel Jack RTX is ready to look for a
NEW device to pair to.
•
Please follow the below steps in a timely manner, without
interruptions for best results.
Transmit Mode (TX):
1. The Swivel Jack RTX should be powered off to begin.
2. Locate the RX/TX switch and select TX.
3. Place your Bluetooth headphones, speaker or other receiving
device into pairing mode.
4. Put the Swivel Jack RTX into pairing mode: press the multi-function
button for 5 seconds until the unit powers on and the indicator
light begins flashing blue rapidly.
5. WAIT for the devices to connect. This may take up to 30 seconds.
6. Once paired, the Swivel Jack RTX light will change to either solid
blue or slow blinks if connected in aptX Low Latency. (Refer to LED
Light Guide.).
7. Plug the Swivel-Jack RTX into an audio source.
8. To begin streaming music wirelessly, simply press the play button
on your audio source, adjust the volume as needed and enjoy!
9. If you want to pair to a second device:
1. PairyourfirstBluetoothreceivingdevice(headphonesor
speakers) to the Swivel Jack RTX (Steps 1-6 above).
2. StartthepairingmodebypressingtheSwivelJack’smulti-
functionbuttonfor3secondsuntiltheLEDlightsbeginrapidly
flashingblue.
3. Wait for the devices to connect. This may take up to 30 seconds.
8